Demister Market Size, Trends and Insights By Type (Wire-mesh Demister, Baffle-type Demister), By Application (Petrochemical, Chemical, Power, Gas Processing), By Material (Stainless Steel, Polypropylene, Fiberglass, Aluminium, Others), and By Region - Global Industry Overview, Statistical Data, Competitive Analysis, Share, Outlook, and Forecast 2024–2033
Reports Description
Global Demister Market was valued at USD 1.3 Billion in 2024 and is expected to reach USD 2.4 Billion by 2033, at a CAGR of 3.5% during the forecast period 2024 – 2033.
A demister is a device fitted to vapor liquid separator vessels to enhance the removal of liquid droplets entrained in a vapor stream. A demister is typically a cylindrical tube with steel gratings installed inside to eliminate the water droplets brought by steam from the geothermal well.
Demister Market: Growth Factors
Increasing environmental regulations
The need for demisters is being driven by the tightening environmental regulations and requirements. As an illustration, consider the Maximum Achievable Control Technology (MACT) requirements for hazardous air pollutants set by the US Environmental Protection Agency (EPA), which mandates that enterprises utilize devices like demisters to lower emissions.
MACT regulations mandate that industries minimize emissions of dangerous air pollutants by utilizing the best and most technically possible control solutions. Demisters are a tried-and-true method of cutting back on the emissions of some pollutants, such as particulate matter and volatile organic compounds (VOCs), which are sometimes found in gas streams.
The Sustainable Development Goals (SDGs), which include environmental preservation, clean water, and air quality, have been ratified by numerous nations and organizations. Technology that helps reduce pollution and conserve the environment, like demisters, is becoming more widely used as a result of the growing emphasis on reaching these sustainable development goals.
Due to the growing environmental restrictions and emphasis on sustainability, there is a global demand for efficient demister solutions. To stay in compliance with regulations, minimize their impact on the environment, and improve their overall operating efficiency and sustainability, manufacturers and industrial operators are investing in modern demister solutions.
Diverse industrial demand fuels demister
The demister market is significantly driven by the growing need for demisters in a variety of industries, including food and beverage, oil & gas, chemical processing, power generation, and pharmaceuticals. Demisters are being incorporated more frequently in industries where gas-liquid separations are essential to increase productivity, lower product loss, and preserve quality.
Additionally, the list of businesses in the market analysis can be altered to meet the specific needs of the client. In petrochemicals, they enhance product purity and protect equipment from corrosion. The pharmaceutical sector relies on demisters to ensure compliance with stringent purity standards.
In power generation, they improve the efficiency of gas turbines and boilers by reducing moisture-related issues. Water treatment plants use demisters to remove mist from gases before release, ensuring environmental compliance.
The food and beverage industry benefits from demisters in processes like fermentation and distillation, where maintaining product quality is crucial. Additionally, demisters support the chemical industry by improving the safety and efficiency of chemical reactions.
This broadening application spectrum underscores the versatility and growing necessity of demisters in maintaining operational efficiency, regulatory compliance, and product quality across various industrial processes.
Demister Market: Restraints
Competition from alternative technologies
The demister market faces significant challenges due to competition from alternative technologies. Advances in separation and filtration technologies, such as high-efficiency particulate air (HEPA) filters and electrostatic precipitators, offer superior efficiency and versatility compared to traditional demisters.
These alternatives often provide better performance in capturing fine particulates and aerosols, essential for industries like pharmaceuticals, electronics, and food processing. Additionally, membrane filtration technologies, which utilize advanced materials like ceramics and polymers, are increasingly favoured for their higher precision and durability.
As industries seek to comply with stricter environmental regulations and improve operational efficiencies, these cutting-edge technologies are becoming more attractive. Consequently, the demand for traditional demisters is declining, compelling manufacturers to innovate or risk obsolescence.
Demister Market: Opportunities
Increasing demand for clean energy
Demand for demisters is predicted to increase as we move toward renewable energy sources like solar and wind power. By eliminating contaminants and particle matter from the flue gas generated by power plants and other industrial operations, demisters can aid in the generation of clean energy.
This is crucial because contaminants including sulphur dioxide, nitrogen oxides, and particulate matter, which can be detrimental to the environment and public health, are frequently found in flue gas. The advantages of demister in supplying clean energy, along with the growing need for clean energy, should present a development potential for the market.
Several factors have led to the considerable rise of the demister market in developed countries. To address the growing need for effective gas-liquid separation technologies, manufacturers in these regions are investing in R&D and production capacities.
Mainly in North America, Europe, and portions of Asia-Pacific, this “Expanding Material in Developed Nations” driver is one of the main factors driving the worldwide demister market’s overall growth and development.
Demister Market: Segmentation Analysis
Global Demister Market is segmented by type, application, material, and region. Based on type, the market is classified into Wire-mesh Demister and Baffle-type Demister. Wire-mesh Demister dominated the market in 2023 with a market share of 65.5% and is expected to keep its dominance during the forecast period 2024-2033.
A wire-mesh demister, also known as a mist eliminator or entrainment separator, is a device used to remove liquid droplets from gas streams. It consists of a mesh pad made of fine wires, typically stainless steel or other corrosion-resistant materials, arranged in a crisscross pattern.
As the gas stream passes through the mesh, the liquid droplets coalesce on the wire surfaces and form larger droplets. These larger droplets eventually become heavy enough to fall out of the gas stream, resulting in a cleaner gas output.
Wire mesh demisters are widely used in industries such as chemical processing, oil and gas, and power generation, where they play a crucial role in improving product purity, protecting downstream equipment, and reducing emissions.
Based on application, the market is classified into petrochemical, chemical, power and gas processing. The petrochemical segment dominated the market in 2023 with a market share of 49.5% and is expected to keep its dominance during the forecast period 2024-2033.
The petrochemical industry significantly drives the demister market due to its high demand for efficient separation technologies. In petrochemical processes, separating liquid droplets from gas streams is crucial to ensure product purity, prevent equipment corrosion, and meet stringent environmental regulations.
Demisters, particularly wire-mesh types, are widely used in distillation columns, absorbers, and scrubbers to enhance process efficiency and reliability. The industry’s need to maximize output and minimize downtime propels the adoption of advanced demister technologies that offer high efficiency and durability.
Moreover, the growing emphasis on sustainable practices and reducing volatile organic compound (VOC) emissions further boosts demand for effective demisting solutions. As global energy consumption and petrochemical production rise, the market for demisters is expected to expand, driven by the sector’s continuous push for optimized operations and compliance with environmental standards.
Consequently, the petrochemical industry’s robust growth and operational needs are pivotal in sustaining and advancing the demister market.
Based on material, the market is classified into stainless steel, polypropylene, fiberglass, aluminium and others. Stainless Steel segment dominated the market in 2023 with a market share of 41.8% and is expected to keep its dominance during the forecast period 2024-2033.
In the demister sector, stainless steel is the most commonly utilized material. Stainless steel demisters are the material of choice for a variety of industrial applications due to their exceptional resistance to corrosion, longevity, and high-temperature tolerance.
Report Scope
| Feature of the Report | Details |
| Market Size in 2024 | USD 1.3 Billion |
| Projected Market Size in 2033 | USD 2.4 Billion |
| Market Size in 2023 | USD 1.2 Billion |
| CAGR Growth Rate | 3.5% CAGR |
| Base Year | 2023 |
| Forecast Period | 2024-2033 |
| Key Segment | By Type, Application, Material and Region |
| Report Coverage | Revenue Estimation and Forecast, Company Profile, Competitive Landscape, Growth Factors and Recent Trends |
| Regional Scope | North America, Europe, Asia Pacific, Middle East & Africa, and South & Central America |
| Buying Options | Request tailored purchasing options to fulfil your requirements for research. |
Demister Market: Regional Analysis
By region, Demister Market is segmented into North America, Europe, Asia-Pacific, Latin America, Middle East & Africa. North America dominated the Demister Market in 2023 with a market share of 41.3% and is expected to keep its dominance during the forecast period 2024-2033.
Demister usage has been fuelled by the growing emphasis on sustainability practices and environmental legislation. North American industries are facing pressure to cut emissions and make sure that strict air quality regulations are followed. Demisters help in this effort by effectively removing dangerous particulate matter from exhaust gasses and capturing it, therefore reducing the impact on the environment.
Additionally, Technological and engineering developments have resulted in the creation of demister solutions that are more economical and effective. Demisters are now a desirable alternative for many different industries, including medicines, petrochemicals, chemical processing, and power generation. Demisters have become a realistic choice for businesses looking to streamline their processes and cut costs.
Demister Market: Recent Developments
- In February 2023, Range Rover unveiled new technology for Demister. The demisted vapor condenses on tubes in the desalination plant, and product water is collected in the distillate tray.
List of the prominent players in the Demister Market:
- Aeroex
- MECS Inc.
- Koch-Glitsch
- Geovent
- FABCO-AIR
- Met-Pro Environmental Air Solutions
- Coastal Technologies Inc.
- AMACS
- Munters Group
- Boegger Industrial Limited
- Ningbo T.C.I Co. Ltd
- Industrial Maid
- Champion
- Mikropor
- Sulzer Ltd.
- FMC Technologies Inc.
- Kimre Inc.
- Hi-Tech Environmental Inc.
- Agilis Technologies Inc.
- RVT Process Equipment
- Others
These key players are adopting various growth strategies such as mergers & acquisitions, joint ventures, expansion, strategic alliances, new product launches, etc. to enhance their business operations and revenues.
The Demister Market is segmented as follows:
By Type
- Wire-mesh Demister
- Baffle-type Demister
By Application
- Petrochemical
- Chemical
- Power
- Gas Processing
By Material
- Stainless Steel
- Polypropylene
- Fiberglass
- Aluminium
- Others
Regional Coverage:
North America
- U.S.
- Canada
- Mexico
- Rest of North America
Europe
- Germany
- France
- U.K.
- Russia
- Italy
- Spain
- Netherlands
- Rest of Europe
Asia Pacific
- China
- Japan
- India
- New Zealand
- Australia
- South Korea
- Taiwan
- Rest of Asia Pacific
The Middle East & Africa
- Saudi Arabia
- UAE
- Egypt
- Kuwait
- South Africa
- Rest of the Middle East & Africa
Latin America
- Brazil
- Argentina
- Rest of Latin America
Table of Contents
- Chapter 1. Preface
- 1.1 Report Description and Scope
- 1.2 Research scope
- 1.3 Research methodology
- 1.3.1 Market Research Type
- 1.3.2 Market Research Methodology
- Chapter 2. Executive Summary
- 2.1 Global Demister Market, (2024 – 2033) (USD Billion)
- 2.2 Global Demister Market: snapshot
- Chapter 3. Global Demister Market – Industry Analysis
- 3.1 Demister Market: Market Dynamics
- 3.2 Market Drivers
- 3.2.1 Increasing environmental regulations
- 3.2.2 Diverse industrial demand fuels demister
- 3.3 Market Restraints
- 3.4 Market Opportunities
- 3.5 Market Challenges
- 3.6 Porter’s Five Forces Analysis
- 3.7 Market Attractiveness Analysis
- 3.7.1 Market Attractiveness Analysis By Type
- 3.7.2 Market Attractiveness Analysis By Application
- 3.7.3 Market Attractiveness Analysis By Material
- Chapter 4. Global Demister Market- Competitive Landscape
- 4.1 Company market share analysis
- 4.1.1 Global Demister Market: company market share, 2023
- 4.2 Strategic development
- 4.2.1 Acquisitions & mergers
- 4.2.2 New Product launches
- 4.2.3 Agreements, partnerships, collaboration, and joint ventures
- 4.2.4 Research and development and Regional expansion
- 4.3 Price trend analysis
- 4.1 Company market share analysis
- Chapter 5. Global Demister Market – Type Analysis
- 5.1 Global Demister Market Overview: By Type
- 5.1.1 Global Demister Market Share, By Type, 2023 and 2033
- 5.2 Wire-mesh Demister
- 5.2.1 Global Demister Market by Wire-mesh Demister, 2024 – 2033 (USD Billion)
- 5.3 Baffle-type Demister
- 5.3.1 Global Demister Market by Baffle-type Demister, 2024 – 2033 (USD Billion)
- 5.1 Global Demister Market Overview: By Type
- Chapter 6. Global Demister Market – Application Analysis
- 6.1 Global Demister Market Overview: By Application
- 6.1.1 Global Demister Market Share, By Application, 2023 and 2033
- 6.2 Petrochemical
- 6.2.1 Global Demister Market by Petrochemical, 2024 – 2033 (USD Billion)
- 6.3 Chemical
- 6.3.1 Global Demister Market by Chemical, 2024 – 2033 (USD Billion)
- 6.4 Power
- 6.4.1 Global Demister Market by Power, 2024 – 2033 (USD Billion)
- 6.5 Gas Processing
- 6.5.1 Global Demister Market by Gas Processing, 2024 – 2033 (USD Billion)
- 6.1 Global Demister Market Overview: By Application
- Chapter 7. Global Demister Market – Material Analysis
- 7.1 Global Demister Market Overview: By Material
- 7.1.1 Global Demister Market Share, By Material, 2023 and 2033
- 7.2 Stainless Steel
- 7.2.1 Global Demister Market by Stainless Steel, 2024 – 2033 (USD Billion)
- 7.3 Polypropylene
- 7.3.1 Global Demister Market by Polypropylene, 2024 – 2033 (USD Billion)
- 7.4 Fiberglass
- 7.4.1 Global Demister Market by Fiberglass, 2024 – 2033 (USD Billion)
- 7.5 Aluminium
- 7.5.1 Global Demister Market by Aluminium, 2024 – 2033 (USD Billion)
- 7.6 Others
- 7.6.1 Global Demister Market by Others, 2024 – 2033 (USD Billion)
- 7.1 Global Demister Market Overview: By Material
- Chapter 8. Demister Market – Regional Analysis
- 8.1 Global Demister Market Regional Overview
- 8.2 Global Demister Market Share, by Region, 2023 & 2033 (USD Billion)
- 8.3. North America
- 8.3.1 North America Demister Market, 2024 – 2033 (USD Billion)
- 8.3.1.1 North America Demister Market, by Country, 2024 – 2033 (USD Billion)
- 8.3.1 North America Demister Market, 2024 – 2033 (USD Billion)
- 8.4 North America Demister Market, by Type, 2024 – 2033
- 8.4.1 North America Demister Market, by Type, 2024 – 2033 (USD Billion)
- 8.5 North America Demister Market, by Application, 2024 – 2033
- 8.5.1 North America Demister Market, by Application, 2024 – 2033 (USD Billion)
- 8.6 North America Demister Market, by Material, 2024 – 2033
- 8.6.1 North America Demister Market, by Material, 2024 – 2033 (USD Billion)
- 8.7. Europe
- 8.7.1 Europe Demister Market, 2024 – 2033 (USD Billion)
- 8.7.1.1 Europe Demister Market, by Country, 2024 – 2033 (USD Billion)
- 8.7.1 Europe Demister Market, 2024 – 2033 (USD Billion)
- 8.8 Europe Demister Market, by Type, 2024 – 2033
- 8.8.1 Europe Demister Market, by Type, 2024 – 2033 (USD Billion)
- 8.9 Europe Demister Market, by Application, 2024 – 2033
- 8.9.1 Europe Demister Market, by Application, 2024 – 2033 (USD Billion)
- 8.10 Europe Demister Market, by Material, 2024 – 2033
- 8.10.1 Europe Demister Market, by Material, 2024 – 2033 (USD Billion)
- 8.11. Asia Pacific
- 8.11.1 Asia Pacific Demister Market, 2024 – 2033 (USD Billion)
- 8.11.1.1 Asia Pacific Demister Market, by Country, 2024 – 2033 (USD Billion)
- 8.11.1 Asia Pacific Demister Market, 2024 – 2033 (USD Billion)
- 8.12 Asia Pacific Demister Market, by Type, 2024 – 2033
- 8.12.1 Asia Pacific Demister Market, by Type, 2024 – 2033 (USD Billion)
- 8.13 Asia Pacific Demister Market, by Application, 2024 – 2033
- 8.13.1 Asia Pacific Demister Market, by Application, 2024 – 2033 (USD Billion)
- 8.14 Asia Pacific Demister Market, by Material, 2024 – 2033
- 8.14.1 Asia Pacific Demister Market, by Material, 2024 – 2033 (USD Billion)
- 8.15. Latin America
- 8.15.1 Latin America Demister Market, 2024 – 2033 (USD Billion)
- 8.15.1.1 Latin America Demister Market, by Country, 2024 – 2033 (USD Billion)
- 8.15.1 Latin America Demister Market, 2024 – 2033 (USD Billion)
- 8.16 Latin America Demister Market, by Type, 2024 – 2033
- 8.16.1 Latin America Demister Market, by Type, 2024 – 2033 (USD Billion)
- 8.17 Latin America Demister Market, by Application, 2024 – 2033
- 8.17.1 Latin America Demister Market, by Application, 2024 – 2033 (USD Billion)
- 8.18 Latin America Demister Market, by Material, 2024 – 2033
- 8.18.1 Latin America Demister Market, by Material, 2024 – 2033 (USD Billion)
- 8.19. The Middle-East and Africa
- 8.19.1 The Middle-East and Africa Demister Market, 2024 – 2033 (USD Billion)
- 8.19.1.1 The Middle-East and Africa Demister Market, by Country, 2024 – 2033 (USD Billion)
- 8.19.1 The Middle-East and Africa Demister Market, 2024 – 2033 (USD Billion)
- 8.20 The Middle-East and Africa Demister Market, by Type, 2024 – 2033
- 8.20.1 The Middle-East and Africa Demister Market, by Type, 2024 – 2033 (USD Billion)
- 8.21 The Middle-East and Africa Demister Market, by Application, 2024 – 2033
- 8.21.1 The Middle-East and Africa Demister Market, by Application, 2024 – 2033 (USD Billion)
- 8.22 The Middle-East and Africa Demister Market, by Material, 2024 – 2033
- 8.22.1 The Middle-East and Africa Demister Market, by Material, 2024 – 2033 (USD Billion)
- Chapter 9. Company Profiles
- 9.1 Aeroex
- 9.1.1 Overview
- 9.1.2 Financials
- 9.1.3 Product Portfolio
- 9.1.4 Business Strategy
- 9.1.5 Recent Developments
- 9.2 MECS Inc.
- 9.2.1 Overview
- 9.2.2 Financials
- 9.2.3 Product Portfolio
- 9.2.4 Business Strategy
- 9.2.5 Recent Developments
- 9.3 Koch-Glitsch
- 9.3.1 Overview
- 9.3.2 Financials
- 9.3.3 Product Portfolio
- 9.3.4 Business Strategy
- 9.3.5 Recent Developments
- 9.4 Geovent
- 9.4.1 Overview
- 9.4.2 Financials
- 9.4.3 Product Portfolio
- 9.4.4 Business Strategy
- 9.4.5 Recent Developments
- 9.5 FABCO-AIR
- 9.5.1 Overview
- 9.5.2 Financials
- 9.5.3 Product Portfolio
- 9.5.4 Business Strategy
- 9.5.5 Recent Developments
- 9.6 Met-Pro Environmental Air Solutions
- 9.6.1 Overview
- 9.6.2 Financials
- 9.6.3 Product Portfolio
- 9.6.4 Business Strategy
- 9.6.5 Recent Developments
- 9.7 Coastal Technologies Inc.
- 9.7.1 Overview
- 9.7.2 Financials
- 9.7.3 Product Portfolio
- 9.7.4 Business Strategy
- 9.7.5 Recent Developments
- 9.8 AMACS
- 9.8.1 Overview
- 9.8.2 Financials
- 9.8.3 Product Portfolio
- 9.8.4 Business Strategy
- 9.8.5 Recent Developments
- 9.9 Munters Group
- 9.9.1 Overview
- 9.9.2 Financials
- 9.9.3 Product Portfolio
- 9.9.4 Business Strategy
- 9.9.5 Recent Developments
- 9.10 Boegger Industrial Limited
- 9.10.1 Overview
- 9.10.2 Financials
- 9.10.3 Product Portfolio
- 9.10.4 Business Strategy
- 9.10.5 Recent Developments
- 9.11 Ningbo T.C.I Co. Ltd
- 9.11.1 Overview
- 9.11.2 Financials
- 9.11.3 Product Portfolio
- 9.11.4 Business Strategy
- 9.11.5 Recent Developments
- 9.12 Industrial Maid
- 9.12.1 Overview
- 9.12.2 Financials
- 9.12.3 Product Portfolio
- 9.12.4 Business Strategy
- 9.12.5 Recent Developments
- 9.13 Champion
- 9.13.1 Overview
- 9.13.2 Financials
- 9.13.3 Product Portfolio
- 9.13.4 Business Strategy
- 9.13.5 Recent Developments
- 9.14 Mikropor
- 9.14.1 Overview
- 9.14.2 Financials
- 9.14.3 Product Portfolio
- 9.14.4 Business Strategy
- 9.14.5 Recent Developments
- 9.15 Sulzer Ltd.
- 9.15.1 Overview
- 9.15.2 Financials
- 9.15.3 Product Portfolio
- 9.15.4 Business Strategy
- 9.15.5 Recent Developments
- 9.16 FMC Technologies Inc.
- 9.16.1 Overview
- 9.16.2 Financials
- 9.16.3 Product Portfolio
- 9.16.4 Business Strategy
- 9.16.5 Recent Developments
- 9.17 Kimre Inc.
- 9.17.1 Overview
- 9.17.2 Financials
- 9.17.3 Product Portfolio
- 9.17.4 Business Strategy
- 9.17.5 Recent Developments
- 9.18 Hi-Tech Environmental Inc.
- 9.18.1 Overview
- 9.18.2 Financials
- 9.18.3 Product Portfolio
- 9.18.4 Business Strategy
- 9.18.5 Recent Developments
- 9.19 Agilis Technologies Inc.
- 9.19.1 Overview
- 9.19.2 Financials
- 9.19.3 Product Portfolio
- 9.19.4 Business Strategy
- 9.19.5 Recent Developments
- 9.20 RVT Process Equipment
- 9.20.1 Overview
- 9.20.2 Financials
- 9.20.3 Product Portfolio
- 9.20.4 Business Strategy
- 9.20.5 Recent Developments
- 9.21 Others.
- 9.21.1 Overview
- 9.21.2 Financials
- 9.21.3 Product Portfolio
- 9.21.4 Business Strategy
- 9.21.5 Recent Developments
- 9.1 Aeroex
List Of Figures
Figures No 1 to 27
List Of Tables
Tables No 1 to 77
Report Methodology
In order to get the most precise estimates and forecasts possible, Custom Market Insights applies a detailed and adaptive research methodology centered on reducing deviations. For segregating and assessing quantitative aspects of the market, the company uses a combination of top-down and bottom-up approaches. Furthermore, data triangulation, which examines the market from three different aspects, is a recurring theme in all of our research reports. The following are critical components of the methodology used in all of our studies:
Preliminary Data Mining
On a broad scale, raw market information is retrieved and compiled. Data is constantly screened to make sure that only substantiated and verified sources are taken into account. Furthermore, data is mined from a plethora of reports in our archive and also a number of reputed & reliable paid databases. To gain a detailed understanding of the business, it is necessary to know the entire product life cycle and to facilitate this, we gather data from different suppliers, distributors, and buyers.
Surveys, technological conferences, and trade magazines are used to identify technical issues and trends. Technical data is also gathered from the standpoint of intellectual property, with a focus on freedom of movement and white space. The dynamics of the industry in terms of drivers, restraints, and valuation trends are also gathered. As a result, the content created contains a diverse range of original data, which is then cross-validated and verified with published sources.
Statistical Model
Simulation models are used to generate our business estimates and forecasts. For each study, a one-of-a-kind model is created. Data gathered for market dynamics, the digital landscape, development services, and valuation patterns are fed into the prototype and analyzed concurrently. These factors are compared, and their effect over the projected timeline is quantified using correlation, regression, and statistical modeling. Market forecasting is accomplished through the use of a combination of economic techniques, technical analysis, industry experience, and domain knowledge.
Short-term forecasting is typically done with econometric models, while long-term forecasting is done with technological market models. These are based on a synthesis of the technological environment, legal frameworks, economic outlook, and business regulations. Bottom-up market evaluation is favored, with crucial regional markets reviewed as distinct entities and data integration to acquire worldwide estimates. This is essential for gaining a thorough knowledge of the industry and ensuring that errors are kept to a minimum.
Some of the variables taken into account for forecasting are as follows:
• Industry drivers and constraints, as well as their current and projected impact
• The raw material case, as well as supply-versus-price trends
• Current volume and projected volume growth through 2033
We allocate weights to these variables and use weighted average analysis to determine the estimated market growth rate.
Primary Validation
This is the final step in our report’s estimating and forecasting process. Extensive primary interviews are carried out, both in-person and over the phone, to validate our findings and the assumptions that led to them.
Leading companies from across the supply chain, including suppliers, technology companies, subject matter experts, and buyers, use techniques like interviewing to ensure a comprehensive and non-biased overview of the business. These interviews are conducted all over the world, with the help of local staff and translators, to overcome language barriers.
Primary interviews not only aid with data validation, but also offer additional important insight into the industry, existing business scenario, and future projections, thereby improving the quality of our reports.
All of our estimates and forecasts are validated through extensive research work with key industry participants (KIPs), which typically include:
• Market leaders
• Suppliers of raw materials
• Suppliers of raw materials
• Buyers.
The following are the primary research objectives:
• To ensure the accuracy and acceptability of our data.
• Gaining an understanding of the current market and future projections.
Data Collection Matrix
| Perspective | Primary research | Secondary research |
| Supply-side |
|
|
| Demand-side |
|
|
Market Analysis Matrix
| Qualitative analysis | Quantitative analysis |
|
|
Prominent Player
- Aeroex
- MECS Inc.
- Koch-Glitsch
- Geovent
- FABCO-AIR
- Met-Pro Environmental Air Solutions
- Coastal Technologies Inc.
- AMACS
- Munters Group
- Boegger Industrial Limited
- Ningbo T.C.I Co. Ltd
- Industrial Maid
- Champion
- Mikropor
- Sulzer Ltd.
- FMC Technologies Inc.
- Kimre Inc.
- Hi-Tech Environmental Inc.
- Agilis Technologies Inc.
- RVT Process Equipment
- Others
FAQs
The major driver for the Demister Market is increasing environmental regulations and diverse industrial demand fuels demister.
The “Petrochemical” had the largest share in the global market for Demister.
The “Wire-mesh Demister” category dominated the market in 2023.
The key players in the market are Aeroex, MECS Inc., Koch-Glitsch, Geovent, FABCO-AIR, Met-Pro Environmental Air Solutions, Coastal Technologies Inc., AMACS, Munters Group, Boegger Industrial Limited, Ningbo T.C.I Co. Ltd, Industrial Maid, Champion, Mikropor, Sulzer Ltd., FMC Technologies Inc., Kimre Inc. , Hi-Tech Environmental Inc., Agilis Technologies Inc., RVT Process Equipment, Others.
“North America” had the largest share in the Demister Market.
The global market is projected to grow at a CAGR of 3.5% during the forecast period, 2024-2033.
The Demister Market size was valued at USD 1.3 Billion in 2024.